or 4 payments of 
Description
TruDesign Aquavalve Manual Diverting Y Valve 90314
Aquavalve 3 Way Valve 1-1/2″ BSPF – White with No tails.
The TruDesign Aquavalve is the most versatile valve on the
market today. The Aquavalve is designed for demanding marine
sanitation applications. The Aquavalve is typically used in marine
toilet applications where protection for the environment
necessitates the need to control effluent discharge – in many
countries this is governed by regulation. The effluent can be held
in a holding tank for later discharge overboard or to a shore side
facility. The TruDesign Aquavalve is moulded from a glass
reinforced nylon composite. High strength, high-modulus glass
fibres impregnated into the nylon provides dramatic strength,
stiffness, toughness, and dimensional stability.
The Aquavalve is a diverting valve.
The rotor seal is designed to operate under low pressure, and
therefore may not be suitable for vacuum toilets depending on
the position of the valve relative to the toilet.
Tails purchased separately.
The TruDesign Aquavalve has been designed to handle hot or cold water and waste treatment chemicals. The Valve is produced in FDA approved materials to handle drinking water but is also ideal as a div erting valve for waste water on sewerage holding or treatment systems.
- Pressure tested to 300 PSI, each valve seal tested with full service and parts backup.
- Stainless steel fasteners.
- Handle position lockable.
- Glass reinforced nylon composite – High strength, stiffness and light weight.
- Immune to corrosion and electrolysis for long service life.
- Chemical resistant – Impervious to diesel, petrol and antifouling paints.
- UV resistant, suitable for all marine environments.
- Certified to ABYC H27 and Burea Veritas 27801/A0 standards.
Caution: Not to be used for diverting fuels.
