Description
Water Holding Tank 60 litres
Roto moulded in 5 mm minimum thickness polypropylene, suitable for drinking water. Nine plumbing connection ports all utilising 1½” BSP threads. Tanks are supplied with all ports blank except the top deck filler port.
Simply cut out any required port with a 40 mm hole saw and screw in 1½” BSP fitting. A range of reducers are available to convert the 1½” BSP port to smaller BSP diameters.
Accessories:
138486 1½” to 1¼” BSP reducer
138487 1½” to 1″ BSP reducer
138488 1½” to ¾” BSP reducer
138489 1½” to ½” BSP reducer
Boat Hut Insight
When selecting a water holding tank for your vessel, consider not only the capacity but also the flexibility of plumbing connections. This tank’s multiple 1½” BSP ports give you the freedom to customise your setup without hassle, but remember: cutting into the tank to create ports requires precision to avoid leaks. A handy tip is to plan your plumbing layout in advance and mark the exact port positions before drilling.
Also, polypropylene tanks are lightweight and corrosion-resistant, making them ideal for marine environments, but they can be vulnerable to UV degradation over time. If your tank will be exposed to sunlight, consider applying a UV protective coating or installing it in a shaded area to extend its lifespan.
And finally, a little humour for boat owners: if you’re tempted to “upgrade” your tank size, remember that water weighs approximately 1 kilogram per litre—so a 60 litre tank adds 60 kilograms to your boat’s load. It’s not just about space but also about stability and fuel efficiency!
Height (mm):400 Length (mm):400 Width (mm):400 Volume Litres:60
