Description
L & R Boat Latch Kits for Fibreglass Boats, Standard and Heavy Duty
This is the FIBREGLASS version of L & R Boat Latch Kits in standard and heavy duty type. For aluminium version, refer to Model 113 (standard) and 107 (heavy duty). (Sold seperately)
SPECIFICATIONS (Refer to image gallery for sizing guide preview)
| PRODUCT CODE/MODEL NUMBER | KIT TYPE | SUITS | KIT INCLUSONS | PACK SIZE | WEIGHT | LATCH – TENSILE STRENGTH | SNARE – TENSILE STRENGTH | MATERIAL |
| 111 | STANDARD | Boats that use a U-bolt (Fibreglass, wood, jet ski, poly and Aluminium boats (ref. USA) that use a U-bolt) | > One (1) Latch: with a lever to launch or retrieve. Made from 316 stainless steel. Tensile strength: 5.6 Tonnes (5600kg). > One (1) Fiberglass Snare: for U-bolt replacement. Tensile strength: 5.4 tonnes (5400kg). | 423mm x 182mm x 74mm (16.7″ x 7.2″ x 2.9″) | 2.7kg (6 lbs) | 4.7 tonnes (4700kg) | 5.4 tonnes (5400kg) | Fibreglass |
| 103 | HEAVY DUTY | Intended for mainly large boats over 7.5 M (25ft). 33% bigger than the standard snare rates. | > One (1) Latch: with a lever to launch or retrieve. Made from 316 stainless steel. Tensile strength: 7.5 Tonnes (7500kg). > One (1) Snare: for U-bolt replacement. Tensile strength: 5.4 tonnes (5400kg). | 423mm x 300mm x 110mm (16.7″ x 11.8″ x 4.3″) | 4kgs (8.8lbs) | 5 tonnes (5000kg) | 5.4 tonnes (5400kg) | Fibreglass |
CHOOSE THE RIGHT TYPE THAT SUITS YOUR BOAT’S NEED
- STANDARD: This is the best option for boats under 7.5 metres (25 feet)
- HEAVY DUTY:This is the best option for boats over 7.5 metres (25 feet) or boats with a high workload.
ABOUT THE L & R BOAT LATCH KIT
- The L & R Boat Latch Kit offers an innovative solution for launching and retrieving your boat quickly and easily whether it’s in the lake, river, ocean, or wherever else you might fancy. Designed by boaties (and engineers) for boaties, and made from durable marine grade 316 stainless steel that requires no strings, wires or electronics, the latch kit has been on-the-water tested by serious boat users for over 15 years.
- With the L & R Boat Latch, you’ll launch and retrieve with such ease and you’ll stay dry doing it. Even better, you can launch and retrieve your boat on your own, meaning you can use it more often and more easily every time.
- With two (2) options – the standard and heavy options – the L & R Boat Latch Kit is designed to be a robust system that can handle almost any boat.
- L & R have established a reputation in Australia for an extremely robust product.
- Engineered from 316 stainless steel, the latch is free from welded weak points and promises to deliver superior strength and reliability. All testing has been independently verified by the National Association of Testing Authorities, Australia (NATA), ensuring the highest standards of performance and safety.
- The L & R Boat Latch is not intended for road travel, only for use on the boat ramp. On the road, the boat should be tensioned up with the winch and tie downs used to keep it in place. Always detach the winch and the safety chain to launch and re-attach before leaving the ramp at the water’s edge.
LAUNCH AND RETRIEVE GUIDE (Kindly refer to image gallery for visual guide)
LAUNCH
- 1.) At the water’s edge set latch to the ‘RETRIEVE’ position.
- 2.) Release safety chain and winch cable, so the boat can roll/slide back and be caught by the latch.
- 3.) Set the latch lever to the ‘RELEASE’ (PORT) position.
- 4.) The boat and trailer are reversed into the water to a depth where the boat MUST be UNABLE to float off the trailer. Back roller/slides about 50mm (2″) under water.
- 5.) The latch is holding the front of the boat, and there is resistance from rollers/slides to movement.
- 6.) Start the boat motor and ease forward 20mm (3/4″). The spring loaded catch will automatically release.
- 7.) Reverse or glide off the trailer.
RETRIEVE
- 1.) Set the latch to ‘RETRIEVE’ (Starboard position).
- 2.) Reverse the trailer into the water to a similar depth used for a ‘good launch’ at this ramp. Too deep (common mistake), means the approach speed will be higher and equipment may be damaged.)
- 3.) Drive the boat onto trailer to within one metre of the latch and stop. The back rollers/slides should be 50mm below the water.
- 4.) When the boat has settled (2 seconds), gently drive it up the last metre to the latch.
- 5.) The latch will now slide over the snare and the boat will be securely held. Stop the motor and lift the propeller leg.
- 6.) Move boat and trailer 3 meter (10ft.) approx. out of water.
- 7.) Attach the winch hook to the snare and winch the boat up so the bow is firmly on the roller or V-block. Secure safety chains and tie downs as usual.
- 8.) NOW move the boat to the car park.
- 9.) DISENGAGE latch for road travel.
PLEASE NOTE: When traversing boat ramps or roads, NEVER rely on the latch to hold the boat onto the trailer. Safety chains and winch cable/strap and tie down straps should always be used to secure the boat to the trailer. The latch should be disengaged for road travel.
OPTIONAL PARTS/SUPPORTING ACCESSORIES (These are available as seperate purchase only.)
- [MODEL 081] Wedge Plate Kit / helps adjust the angle the snare meets the latch.
- [MODEL 083] Roller Extender Kit / used for the roller that needs to reach further to the bow part for installation.
INSTALLATION AND TROUBLESHOOTING GUIDE: kindly refer to Boat Latch website for full details of guide.










