Description
Hansen MD Chamfer Tool suits 75-110mm Pipe (3″ to 4 5/16″) / HMDCHAMFL
This is a deburring tool used to create a beveled edge on the end of MD pipe for
easy and clean insertion of pipe into MD fittings.
SPECIFICATIONS
- PRODUCT CODE: HMDCHAMFL
- SUITS: Tool for 75-110mm Pipe (3″ to 4 5/16″)
- For 20mm-63mm Pipe, see HMDCHAMF (Available as seperate purchase)
- SPARE PART: HMDCHAMFB MD Chamfer Blades (10 Qty.)
- Easy Fit Compression Fittings are WRAS and AS/NZS 4020 and AS/NZS 4129:202 Approved Product, see certificate at Hansen Australia Website. It also have achieved the esteemed WaterMark Certification for use in plumbing and drainage installations. See certificate number at Hansen Australia Website.
- Easy Fit Poly Fittings are AS/NZS 4020:2018 Approved Product, see certificate at Hansen Australia Website.
ABOUT HANSEN EASY FIT COMPRESSION FITTINGS
- In the late 1970s Bert Hansen developed a range of easy to use “cold fit pipe fittings” that revolutionised the way farmers joined Polyethylene pipe. Adding to the Easy Fit range of
pipe fittings, Hansen introduces the new Easy Fit Compression Fittings range. - The Easy Fit Compression fitting range has been designed specifically for joining
Medium Density Polyethylene pipe together. - Building on 60 years experience in the manufacturing of pipe fittings and valves, the sleek, precision, compact design uses only the very best materials to withstand the harshest weather conditions.
- Hansen Products knows the importance that pipe fittings play in the performance and
control of fluid delivery, flow and pressure within a pipe system. - This has seen Hansen Products build a reputation for providing high performance, easy to use, innovative, simple products that provide our customers with “Best Installed Value”. All Hansen
products carry our Hansen Warranty.
EASY FIT COMPRESSION FITTINGS QUICK AND EASY INSTALLATION (See visual installation in image gallery)
Reliable leak proof seals are the hallmark of any Hansen fitting and that’s no exception when it comes to the Easy Fit Compression range, the simple steps make installation a breeze.
- 1.) Cut and chamfer the pipe with pipe cutters, knife or saw. Ensure a square cut of pipe ends. Clean burrs from pipe ends. Keep the pipe end clean and as free of scratches
and imperfections as possible.
2.) Undo the Nut to the last thread, do not remove Nut from the Body.
3.) Insert the pipe into the fitting through the Nut, White Grip Ring & Thrust Ring until it meets resistance at the Seal. Give the pipe a firm push past the Seal all the way until it hits the final stop point.
4.) Firmly hand tighten the Nut. Use a pair of Poly Grips for a further half turn past hand tight for final tightening on 40mm fittings and greater.
- The hydraulic seal is created when the pipe passes the Seal. Tightening the Nut is to achieve pull out resistance of the pipe.
- Hansen Easy Fit Compression Fittings should be installed onto Medium Density pipe that has been installed in accordance with the following standards:
- AS/NZS 2566 Part 1 and Supplement “Buried Flexible Pipelines – Structural Design” Detailed Installation and Site Pressure Testing.
- AS/NZS 2566 Part 2 “Installation”
- AS/NZS 2033 Installation of Polyethylene Pipe Systems
For more information on best practice installations, please contact [email protected]. Failure to complete installation in accordance with the above standards, may void any warranties given by Hansen Products (NZ) Limited in respect to the Fitting. It is recommended to follow pipe manufacturers guidelines.
HANSEN EASY FIT COMPRESSION AND POLY FITTINGS BROCHURE AND CHEAT SHEETS
- For HANSEN Easy Fit Compression and Poly Fittings Brochure and Cheat Sheets, refer to Hansen Australia Website.
HANSEN EASY FIT COMPRESSION AND POLY FITTINGS HANDY TIPS AND COMMERCIAL VIDEOS
- For HANSEN Easy Fit Compression and Poly Fittings Handy Tips and Commercial Videos, refer to Hansen Australia Website.
FREQUENTLY ASKED QUESTIONS
- QUESTION: Can I use Hansen Easy Fit Fittings under driveways, paths and foundations?
- ANSWER: Hansen does not recommend the use of any Hansen Easy Fit Fittings under any driveways, paths or foundations.
- ANSWER: Yes. While marine applications vary, Hansen Easy Fit Poly Fittings are resistant to sea water. The fittings will not leach any substances that will be harmful to marine life. Hansen Easy Fit Poly fittings have provided excellent service in marine applications for many years without failure. If you require further information, please contact us with details regarding your application.
- ANSWER: Yes, Hansen Easy Fit MD Compression Fittings are potable (drinking) water approved.
- ANSWER: No, as the high concentration of chlorine used in the water for pools will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by our Hansen Warranty.
- ANSWER: Yes, all Hansen manufactured products carries Hansen Warranty.
- ANSWER: Up to 32mm just tighten hand tight and all sizes above use a spanner to tighten another ½ to 1 turns past hand tight. Remember you already have a seal once the pipe is past the O-ring, all the nut is doing is compressing the grip ring onto the pipe to hold the pipe in place.
- ANSWER: Wind the nut by hand onto pipe as tight as possible. Use a spanner or pipe grips to tighten until nut is frim on the pipe. For more information refer to installation instructions.
- ANSWER: Refer to a qualified water reticulation installer for professional advice to suit your needs.
- ANSWER: Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by our Hansen Warranty.
- ANSWER: New Zealand LDPE (Low Density Polyethylene Pipe), EnduroFlex, Australian Rural Class B, Irish Imperial Polythene Pipes (including washdown hose and non toxic tube).
